Advertisement
The purpose of safety symbols
is to attract your attention to possible
dangers.
The safety symbols
and the explanations
with them deserve
your careful
attention
and understanding.
The symbol warnings
do not, by themselves,
eliminate
any danger. The instructions
and warnings
they give are no substitutes
for proper accident
prevention
measures.
WARNING:
Be sure to read and understand
all safety instructions
in this
manual, including
all safety alert symbols,
such as "DANGER,"
"WARNING,"
and "CAUTION,"
before using this Reciprocating
Saw. Failure to following
all
instructions
listed below may result in electric shock, fire and/or serious personal
injury.
SYMBOL
MEANNING
_b, SAFETY
ALERT SYMBOL:
Indicates
DANGER,
WARNING,
OR CAUTION.
May be used in conjunction
with other symbols
or pictographs.
,_
DANGER:
Failure to obey this safety warning will result in death or serious
injury to yourself or to others. Always follow the safety precautions
to reduce the
risk of fire, electric
shock, and personal injury.
,_k WARNING:
Failure to obey this safety warning can result in death or serious
injury to yourself or to others. Always follow the safety precautions
to reduce the
risk of fire, electric
shock, and personal injury.
CAUTION:
Failure to obey this safety warning may result in death
or serious injury to yourself or to others. Always follow the safety precautions
to
reduce the risk of fire, electric,
shock and personal injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform user of important
information
and/or instructions
that could lead to
equipment
or other property
damage if not followed.
Each message
is preceded
by the word "NOTE"
as in the example
below.
NOTE: Equipment
and/or
property
damage
may result
if these
instructions
are not followed.
WEAR
YOUR
The operation
of any power tool can result in foreign
objects
being thrown
into your eyes, which can result
in severe eye damage.
Before beginning
power tool
operation,
always wear safety goggles
or safety glasses
with side shields and a full-face
shield when needed.
We recommend
a Wide Vision Safety Mask for use over
eyeglasses
or standard
safety glasses with side shields,
available
at Sears Stores or other Craftsman
outlets.
Always
use eye protection
that is marked to comply
with
ANSI Z87.1
17175
Manual_Revised_08
0724
Page 3
Advertisement
