Table of Contents
Advertisement
,_
WARNING:
Your saw should never be connected
to the power source when
you are assembling
parts,
making adjustments,
installing
or removing
blades, cleaning,
or when it is not in use.
Disconnecting
the reciprocating
saw will prevent accidental
starting, which could cause
serious personal injury.
ON/OFF SWITCH
AND
VARIABLE SPEED CONTROL
(Fig. 3)
Your scrolling
reciprocating
saw is equipped
with a trigger
switch to turn the saw on and
off and to control the speed.
1.
To start the saw, squeeze
the trigger switch.
2_
To stop the saw, release the
trigger switch and allow it to
return to the "OFF" position.
3_
To vary the speed, simply
increase or decrease the
pressure on the trigger
switch. The more tightly the
trigger switch is squeezed,
the higher the speed.
LIVE-TOOL INDICATOR
(Fig. 4)
Your scrolling reciprocating
saw
also has a "Live-Tool
indicator"
green LED light, located in the
handle where the power cord
enters the handle. This green
light is always on when the saw
is plugged into a power source.
INSTALLING
AND REMOVING
A SAW BLADE (Fig. 5)
!.
Disconnect
the saw from
the power supply.
Fig. 3
o4
Fig. 5
Live-tool
ator
27224 Manual
Revised 09-0608
Page 12
Advertisement
Table of Contents
