Table of Contents
Advertisement
2.
Pull down on the blade clamp lever.
3.
Insert the saw blade into the blade clamp as far as possible and release the
blade-clamp
lever to lock the blade in position.
4.
To remove the blade, pull down on the blade clamp lever and pull the blade
out of the clamp
BLADE SELECTION
in order to obtain the best performance
from the saw, it is important to select the
correct blade for the particular
application
and type of material to be cut.
NOTE: Use of a scrolling reciprocating
saw blade is recommended
to achieve
the best cutting
performance
when using the scrolling function.
PIVOT SHOE
Sliding the Shoe In or Out (Fig.6)
For maximum
control and
longer blade life, the pivot shoe
slides in or out to adjust the
effective stroke length.
Disconnecting
the reciprocating
saw will prevent accidental
starting, which could cause
serious personal injury.
1,
2_
3_
Disconnect
the saw from
the power supply.
Pull the shoe-release
button and slide the shoe
to the desired position. The
shoe can be locked in any
position.
Release the shoe-release
button in order to lock the
shoe in the desired position.
Pivoting
the Shoe
(Fig.7)
The shoe pivots in order to
provide maximum
control
against the surface being cut.
2_
Disconnect
the saw from
the power supply.
Hold the saw securely, and
then pivot the shoe to the
desired angle.
Fig. 6
Fig, 7
Shoe-release
button
27224 Manual
Revised 09-0608
Page 13
Advertisement
Table of Contents
