Advertisement
Available languages
Available languages
Before you store the air compressor,
make sure you do the following:
1.
Review the "Maintenance"
section on the preceding
pages and perform scheduled
maintenance as necessary.
2.
Set the On/Auto/Off
Iever to "Off"
and unptug unit.
3.
Turn the regulator
counterclockwise
and set the
outlet pressure to zero.
4.
Remove the air toot or accessory.
5.
PulI ring on safety valve alIowing
air to bleed from the tank untiI
tank pressure is approximately
20 psi. Release safety valve ring.
6.
Drain water from air tank by
opening drain valve on bottom of
tank.
_Risk
of Bursting,
Water will
condense
in the air tank,
if not
drained,
water will corrode
and
weaken
the air tank causing
a risk
of air tank rupture.
7.
After the water has been
drained, close the drain or drain
vaIve.
NOTE: If drain valve is plugged,
release aII air pressure.
The valve
can then be removed, cleaned, and
reinstalIed.
8.
Protect the electrical cord and
air hose from damage (such as
being stepped on or run over).
Wind them Ioosely around
the compressor
handte, df so
equipped)
9.
Store the air compressor in a
clean and dry location.
A09710
20-ENG
Advertisement
