Advertisement
Available languages
Available languages
Know Your Air Compressor
READ THiS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to famiIiarize yourself with
the location of various controls and adjustments.
Save this manual for future
reference.
Safety Valve
Description
of Operation
Become familiar with these controls
before operating the unit.
On/Auto/Off
Switch:
Turn this switch
"On/Auto" to provide automatic
power to the pressure switch and
"Off" to remove power at the end of
each use.
Pressure
Switch: The pressure
switch automatically
starts the
motor when the air tank pressure
drops below the factory set "cut-in"
pressure, it stops the motor when the
air tank pressure reaches the factory
set "cut-out"
pressure.
Safety Vamve: if the pressure switch
does not shut off the air compressor
at its "cut-out"
pressure setting, the
safety valve will protect against high
pressure by "popping
out" at its
factory set pressure (slightly higher
than the pressure switch "cut-out"
setting).
Outlet Pressure
Gauge:
The outlet
pressure gauge indicates the air
pressure avaiIable at the outlet side
of the reguIatoK This pressure is
controlled by the regulator and is
always less than or equal to the tank
pressure.
Tank Pressure
Gauge:
The tank
pressure gauge indicates the reserve
air pressure in the tank.
Regulator:
ControIs the air pressure
shown on the outlet pressure
gauge. Pull the knob out and turn
clockwise to increase pressure
and counterclockwise
to decrease
pressure. When the desired pressure
is reached push knob in to lock in
place.
Universam Quick-Connect
Body:
The universal quick-connect
body
accepts the three most popular styIes
of quick-connect
plugs: industrial,
automotive
(Tru-flate), and ARC. One
hand push-to-connect
operation
makes connections
simple and easy.
Brain Vamve:The drain valve is
located at the base of the air tank
and is used to drain condensation
at
the end of each use.
13-ENG
A09710
Advertisement
