Advertisement
Available languages
Available languages
6.
After 15 minutes, close the drain
valve (clockwise). The air receiver
wilI fill to "cut-out"
pressure and
the motor will stop.
The compressor is now ready for use.
Before
Each
Start=Up:
1.
Place On/Auto/Off
lever to "Off".
2.
Pu!I regulator knob out, turn
counterclockwise
until it stops.
Push knob in to lock in place.
3.
Attach hose and accessories.
NOTE: The hose or accessory
wilI require a quick connect ptug
if the air outlet is equipped with a
quick connect.
pressure causes a hazardous
risk of
bursting, Check the manufacturer's
maximum
pressure rating for air
roomsand accessories,
The reguJator
out_et pressure
must never exceed
the maximum
pressure rating,
Bow
to Start:
1.
Turn the On/Auto/Off
lever
to "On/Auto" and allow tank
pressure to build.
Motor will
stop when tank pressure reaches
"cut-out"
pressure.
2.
PulI the regulator knob out
and turn clockwise to increase
pressure. When the desired
pressure is reached push knob in
to Iock in place.
NOTE: Always operate the air
compressor
in welI-ventilated
areas
free of gasoline or other combustible
vapors. If the compressor
is being
used to operate a sprayer DO NOT
place near the spray area.
The compressor
is ready for use.
15-ENG
A09710
Advertisement
