Table of Contents
Advertisement
"
r
getting to know your belt and disc sande
9. ON-OFF SWITCH
The On-Off Switch has a locking feature. THIS FEA-
1, To turn machine "ON" insert key into switch.
NOTE:
Key is made of yellow plastic; locate in loose
parts bag.
2, Insert finger under switch lever and pull end of switch
out.
4. To lock switch in OFF position . . ,hold switch IN
with one hand.,
_ REMOVE key with other hand.
WARNING:
For your own safety, always lock the
switch "OFF" when machine iS not in use.., remove
key and keep it in a safe place..,
also,,,
in the
event of a power failure (all of your lights go out)
turn switch off..,
remove the key and store it
remote from belt and disc sander, This will prevent
the machine from starting up again when the power
_ comes back on,
16
Hide quick links:
Advertisement
Table of Contents
