Table of Contents
Advertisement
Available languages
Available languages
RANDOM
ORBIT
The random orbit motion provides overlapping sanding movements by
combining orbital and spinning motion.
DUST BAG
Use the dust bag for removing dust from the sanding space to help keep the
work area clean.
VACUUM
ADAPTOR
The onboard vacuum adaptor allows you to connect to a 1-1/4 in. or 2-1/4 in.
diameter vacuum hose to help keep the work area clean.
ON/OFF
ROCKER
SWITCH
The on/off rocker switch is conveniently located for easy control, and is sealed
to keep out dust for long life.
HOOK=AND=LOOP
SANDING
PAD
The hook-and-loop
sanding pad is for easy attachment
of hook-and-loop
type
sandpapers
with pre-punched
holes.
PAD
BRAKE
The integrated
pad brake will quickly
stop the spinning
pad when the sander is
turned off.
,_
WARNING:
If any parts are broken or missing, do not attempt
to connect
the
sander to a power source or operate the sander until the broken or missing parts
are replaced.
Failure to do so could result in possible
serious injury.
_,
WARNING:
Do not attempt to modify this sander or create accessories
not
recommended
for use with this sander. Any such alteration or modification
is misuse
and could result in a hazardous condition
leading to possible serious injury.
,_
WARNING:
To prevent accidental starting that could cause serious personal injury,
always disconnect the sander from the power source when assembling parts, making
adjustments, installing or removing sandpaper, cleaning, or when it is not in use.
UNPACKING
*
Carefully remove the tool and any accessories
from the carton.
Make sure
that all items listed in the packing
list are included.
*
Inspect the tool carefully to make sure no breakage
or damage occurred
during shipping.
10
Advertisement
Table of Contents
