Advertisement
SPECIFICATIONS
Chuck .............................................................................................................................................................
3/8 in., Keyless
Motor ..................................................................................................................................................................
14.4 Volt DC
Switch ............................................................................................................................................................
Variable Speed
No Load Speed ......................................................................................................................................................
0-800/rain.
Charger Input ......................................................................................................................................
120 V, 60 Hz, AC only
Charge Rate .................................................................................................................................................................
1 Hour
Torque ......................................................................................................................................................................
140 in.lb.
_Craftsman
EX101531-
14.4V testcriter!a
"_
140
in.lb, torque
425
#8 x 1.25-in. wood screws per battery pack charge into pine lumber.
225
3/8- n. d ameter hoes per battery pack charge nto 2- n. nom nap ne umber.
|
J
KNOW
YOUR
RIGHT
ANGLE
DRILL-DRIVER
See Figure 1.
Before attempting to use your right angle drill, familiarize
yourself with all operating features and safety
requirements.
KEYLESS
CHUCK
The drill-driver has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
SWITCH
To turn the drill-driver ON, depress the switch trigger.
Release switch trigger to turn the drill-driver OFF.
SWITCH
LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
VARIABLE
SPEED
This toot has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
FORWARD/REVERSE
SELECTOR
(DIRECTION
OF ROTATION
SELECTOR)
The drill-driver has a forward/reverse
selector located
above the switch trigger.
WRIST
STRAP
A wrist strap is provided to reduce the chances of dropping
the drill-driver. Place one hand through the wrist strap
when carrying tool.
BIT STORAGE
When not in use, bits provided with the drill-driver can be
placed in the storage area located on the base of the
motor housing.
CHARGER
Your charger has a "key hole" hanging feature for
convenient, space saving storage. Screws should be
installed so that center distances are 4-1/2 inches apart.
RIGHT
ANGLED
DESIGN
The right angle head design feature allows the user to get
into tight work areas for drilling and driving.
7
Advertisement
