Advertisement
KNOW
YOUR
DRILL-DRIVER
See Figure 1.
Before attempting to use any tool, familiarize yourself with
all operating features and safety requirements.
WRIST
STRAP
A wrist strap is provided to reduce the chances of drop-
ping your drill-driver. Plac_one
hand through the wrist
strap when carrying tool.
SPECIFICATIONS:
Chuck Capacity
Motor
Charger Rating
No Load Speed
Switch
Charge Rate
Maximum Torque
TORQUE
ADJUSTMENTRING
_
SCREWDRIVER BITS
KEYLESSCHUCK
3/8 in.
14.4 Volt DC
120 Volts, 60 Hz, AC Only
0 - 6OO RPM
Variable Speed - Reversible
10 -12 Hours
100 in. Ibs.
BATrERY PACK
RED
LIGHT
FORWARD
BATTERY
REVERSE
CHARGER
SELECTOR
CHARGING
STAND
SIT
SWITCH
TRIGGER
BATTERYPACK
SHOWNINTOOL
WRISTSTRAP
Fig. 1
,_
WARNING:
If any parts are missing, do not operate tool until the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
,_
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and a full face shield when needed. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears
Retail Stores. Always wear eye protection which is marked to comply with ANSI Z87.1.
6
Advertisement
