Craftsman 315.101531 Operator's Manual page 12

TO INSTALL BATTERY PACK
• Lock the switch trigger on the drill by placing the
direction of rotation selector in the center position. See
Figure 2.
• Place the battery pack in the drill. Align the raised rib
on the battery pack with the groove inside the drill. See
Figure 7.
LATCHES
• Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured in the
drill before beginning operation.
CAUTION: When placing the battery pack in the
drill, be sure the raised rib on the battery pack aligns
with the groove inside the drill and latches snap into
place properly. Improper assembly of the battery
pack can cause damage to internal components.
TO REMOVE BATTERY PACK
• Lock the switch trigger on the drill by placing the
direction of rotation selector in the center position. See
Figure 2.
• Locate the latches on the side of the battery pack and
depress to release the battery pack from the drill. See
Figure 7.
• Remove the battery pack from the drill.
\
DEPRESSLATCHES TO
RELEASEBATTERYPACK
Fig. 7
12