Download Print this page

Craftsman 315.101531 Operator's Manual page 15

3/8 in. 14.4 volt cordless right angle drill-driver variable speed / reversible
Hide thumbs

Advertisement

,_
WARNING:
When servicing, use only identical
Craftsman replacement
parts. Use of any other part
may create a hazard or cause product damage.
Do not abuse power tools. Abusive practices can damage
toot as well as workpiece.
,_
WARNING:
Always remove the battery pack from
the tool when assembling parts, making adjustments,
cleaning or when not in use. Removing the battery
pack will prevent accidental starting that could cause
serious personal injury.
Use clean cloths to remove dirt, carbon dust, etc..
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based
products, penetrating oils,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken or destroy
plastic.
Only the parts shown on parts list, page 17, are intended
to be repaired or replaced by the customer. All other parts
should be replaced at a Sears Service Center.
_i
WARNING:
Do not attempt to modify this toot or
create accessories not recommended
for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
,_
WARNING:
Always wear safety glasses with side
shields when using compressed air to clean tools. If
the operation is dusty, also wear a dust mask.
BATTERIES
The battery pack for the drill-driver is equipped with
nickel-cadmium
rechargeable
batteries. Length of service
from each charging will depend on the type of work you
are doing.
The batteries in this toot have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. Do not disassemble
battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry,
could result in a serious burn.
Store and charge your batteries in a cool area.
Temperatures
below 50°F or above 100°F will shorten
battery life.
Never store batteries in a discharged condition.
Recharge them immediately after they are
discharged.
All batteries gradually lose their charge. The higher
the temperature the quicker they lose their charge. If
you store your tool for long periods of time without
using it, recharge the batteries every month or two.
This practice will prolong battery life.
To obtain the longest possible battery life, we suggest the
following:
To preserve natural resources, please
recycle or dispose of batteries properly.
This product contains nickel-cadmium
batteries. Local, state or federal laws
may prohibit disposal of nickel-cadmium
batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
BATTERY
PACK REMOVAL
AND PREPARATION
FOR RECYCLING
A
WARNING:
Upon removal, cover the battery pack's
terminals with heavy duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components.
Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
15

Advertisement

loading

  Related Manuals for Craftsman 315.101531