Advanced Settings - Aastra SIP 480I Administrator's Manual

IP Phone Administrator Guide
Aastra Web UI

Advanced Settings

The Advanced Settings section provides the following options:
Heading
Network
Global SIP
Lines 1 through 9
(480i, 480i CT, and 9133i
only)
Configuration Server
Firmware Update
Troubleshooting
2-8
Description
Allows you to set basic network settings such as, DHCP and
IP address, and advanced network settings such as,
Network Address Translation (NAT) and time servers. The
Network subcategory also allows you to set Type of Service
(ToS)/Differentiated Services Code Point (DSCP), and
VLAN settings
Allows you to set basic and advanced global SIP settings,
and Real-time Transport Protocol (RTP) settings that apply
to all lines on the IP phone
Allows you to set SIP authentication settings, SIP network
settings, and DTMF method to use on a specific line
Allows you to set the protocol to use on the configuration
server (TFTP (default), FTP, or HTTP), configure automatic
firmware and configuration file updates, enable/disable
auto-resync, and assign an XML push server list.
Allows you to manually perform a firmware update on the IP
phone from the configuration server
Allows you to perform troubleshooting tasks whereby the
results can be forwarded to Aastra Technical Support for
analyzing and troubleshooting
41-001129-00 Rev 09, Release 1.4.1