Table of Contents
Advertisement
IP Phone Administrator Guide
IP Phone UI
IP Phone UI
The IP phone UI provides an easy way to access features and functions for using
and configuring the IP phone. Hardkeys include Hold (480i/480iCT), Swap
(9112i), Redial, Options, Xfer, Conf, Icom (480i/480iCT), and Services (480i/
480iCT). Specific keys are also programmed to access the Directory List and the
Callers List.
Reference
For more information on using the IP phone UI hardkeys, see Chapter 5, the
section,
Phone User Guide.
Options Key
The Options key allows you to access the "Options List" of each phone model.
Accessible options in this list are for both user and administrator use. An
administrator must enter a password for administrator options.
This document describes the administrator options only. For a description of the
user options in the "Options List", see your model-specific SIP IP Phone User
Guide.
2-2
"Hard Keys"
on
page 5-9.
Note: An administrator has the option of enabling and disabling the use
of password protection in the IP phone UI. This is configurable using the
configuration files only. For more information about this feature, see
Appendix A, the section
You can also refer to your model-specific IP
"Password Settings"
on
41-001129-00 Rev 09, Release 1.4.1
page A-8.
Advertisement
Table of Contents
Troubleshooting
