Download Print this page

Craftsman 315.101300 Owner's Manual

3/8 in. drill-driver variable speed / reversible double insulated

Advertisement

Quick Links

Owner's Manual
ICRRFTSMI:IN [
318 in. DRILL-DRIVER
Variable Speed / Reversible
Double Insulated
Model No.
315.101300
Save this manual for
future reference
,_
CAUTION:
Read and follow
all Safety Rules and
Operating
Instructions before
first use of this product.
• Safety
• Features
• Operation
• Maintenance
• Parts List
Customer
Help Line: 1-800-932-3188
Sears Roebuck
and Co., Hoffman
Estates,
IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
972000-871
4-01
0( 0s

Advertisement

loading

Related Manuals for Craftsman 315.101300

Summary of Contents for Craftsman 315.101300

  • Page 1 • Maintenance all Safety Rules and • Parts List Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears Roebuck and Co., Hoffman Estates, IL 60179 USA 0( 0s Visit the Craftsman web page: www.sears.com/craftsman 972000-871 4-01...
  • Page 2 TABLE OF CONTENTS • Table of Contents ............................... • General Safety Rules ............................. • Specific Safety Rules and/or Symbols ......................• Features ................................. • Operation ..............................7-11 • Maintenance ..............................• Accessories ..............................carry the tools or pull the plug from an outlet. WARNING: Read and follow all instructions.
  • Page 3 Tool Use and Care Check for misalignment or binding of moving parts, breakage of parts, and any other condi- • Use clamps or another practical way to secure tion that may affect the tool's operation. If and support the workpiece to a stable platform. damaged, have the tool serviced before using.
  • Page 4 Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may con- tact hidden wiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Additional Rules For Safe Operation...
  • Page 5 SYMBOLS SYMBOL NAME DESIG NATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) Minutes Time Alternating Current Type or a characteristic of current Direct Current Type or a characteristic of current No Load Speed Rotational speed, at no load .../min Revolutions or Reciprocation Per Minute...
  • Page 6 KNOW YOUR DRILL-DRIVER KEYLESS CHUCK See Figure 1. Your drill-driverhas a keyless chuck that allows you to Before attempting to operate your drill-driver, familiar- hand tighten or release drill bit in the chuck jaws. ize yourself with all operating features and safety SWITCH requirements.
  • Page 7: Specifications

    APPLICATIONS PRODUCT SPECIFICATIONS: DRILL-DRIVER 315.101300 (Use only for the purpose listed below) 1/16 in. to 3/8 in. • Drilling in wood. Chuck Capacity • Drilling in ceramics, plastics, fiberglass, and Rating 120 V, 60 Hz, AC only laminates. 4.5 Amperes Input •...
  • Page 8 SWITCHLOCK LOCK (tighten) or UNLOCK (release) the chuck jaws. Grasp and hold the collar of the chuck with one hand. See Figure 3. Rotate the chuck body with your other hand. Insert The switch trigger can be locked in the OFF position. drill bit straight into the chuck the full length of the This feature can be used to prevent the possibility of jaws, and tighten securely by rotating the chuck body...
  • Page 9 ADJUSTABLE TORQUE CLUTCH WARNING: Make sure to insert drill bit straight into chuck jaws. Do not insert drill bit into chuck Your drill is equipped with an adjustable torque clutch jaws at an angle and then tighten, as shown in for driving different types of screws into different Figure 5.
  • Page 10 BIT STORAGE binding or WARNING: Be prepared for See Figure 7. breakthrough. When these situations occur, drill has a tendency to grab and kick opposite to the When not in use, bits provided with your drill can be direction of rotation and could cause loss of placed in the storage area located on the top of your control when breaking through material.
  • Page 11 CHUCK REMOVAL TO RETIGHTEN A LOOSE CHUCK See Figure 9, The chuck may become loose on the spindle and The chuck must be removed in order to use some develop a wobble, accessories. To remove: To tighten, follow these steps: •...
  • Page 12 GENERAL DOUBLE INSULATION All parts represent an important part of the double Double insulation is a concept in safety in electric insulation system and should be serviced only at a power tools, which eliminates the need for the usual Sears Service Center. three-wire grounded power cord.
  • Page 13 Thefollowing recommended accessories a recurrently available atSearsretail s tores. • HighSpeed Bits(Forwood or metal) 3/8 in. Max. • Doweling Jig (Item No._9-4186) • Masonry Bits 1/2 in. Max. • Drill Stand (Item No. _9-25989) • Wood Boring Bits 1 in. Max. •...