Specifications; Features - Craftsman 320.28084 Product Manual

PRODUCT SPECiFiCATiONS
Rating 12.5 Amps
No load Speed 12000-25000RPM
Peak H P 2-1/4
Input 120V, 60Hz AC
Collets/Nuts and Cutting Bit Shank Diameters 1/4 in., 1/2 in.
Fixed Base Diameter 6 inches
Plunge Base Diameter 6 -11/16 inches
D-Handle Base Diameter 6 inches
Sub-Base Opening (Diameter for cutting bit use) 1-1/4 inches
Sub-Base Thickness 0.23 inches (6mm)
Fixed Base Depth of Cut 1-3/4 inches (45mm)
Plunge Base Depth of Cut 2-1/8 inches (55mm)
D-handle Base Depth of Cut 1-3/4-inches (45mm)
NOTE: Before attempting to use your router, familiarize yourself with all of the
operating features and safety requirements.
Your router has a precision-built electric router motor, and it should be connected
only to a 120-volt, 60-Hz AC ONLY power supply (normal household current).
Do not operate on direct current (DC). This large voltage drop will cause a loss
of power and the router motor will overheat. If the router does not operate when
plugged into a correct 120-volt, 60-Hz AC ONLY outlet, check the power supply.
This router has a 10-ft, 2-wire power cord (no adapter needed).
This Router Combo has the following features:
1. 12.5 Amp, 244 Peak HP, Variable Speed Router motor, which runs at 12,000
to 25,000 RPM (no-load speed).
2. Variable Speed Dial for matching the speed to the workpiece material and bit size.
3. Electronic-Feedback Circuitry maintains constant speed under load for a
quality finish in all materials.
4. Soft-start feature minimizes the torque twist common with larger router
motors by limiting the speed at which the router motor starts. This also
increases the motor's life.
5. Quick-Clamp System allows the router motor to be changed among Fixed,
Plunge, and D-Handle bases without tools.
6. Fixed Base and D-Handle bases feature coarse and fine depth adjustments
for accurate set-ups.
28084 ManuaLRevised 07-0712 Page 14