Table of Contents
Advertisement
Cleaning
1.
Turn the On/Off switch to Off and unplug the cord.
2.
Wipe exterior plastic and metal parts clean using damp cloth. Do not get moisture or water into
interior moving parts.
3.
Any other servicing should be performed by a qualified service representative.
WARNING:
Risk of Unsafe Operation. Voltage sources, moving parts, or compressed air
sources are exposed when repairing the inflator. Personal injury can occur. Unplug the inflator
before attempting the repairs.
PROBLEM
Motor will not run.
Model No. 75120
Working amperage at 32 PSI: 11A
Max amperage: 15A
.60 SCFM @ 30 PSI
MAINTENANCE
TROUBLESHOOTING
CAUSE
Blown Fuse
Faulty motor
SPECIFICATIONS
11
CORRECTION
1. Check fuse in end of 12
Volt plug. See diagram
below.
2. Check automobile fuse for
12 Volt receptacle.
Contact 1-800-874-5771
Advertisement
Table of Contents
