Table of Contents
Advertisement
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Blade Diameter
Blade Arbor
Cutting Depth at 0° Bevel Cut
Cutting Depth at 45° Bevel Cut
Your trim saw has been shipped completely
assembled except for the blade. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. If any parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts before attempting to operate saw. A
blade, blade wrench, rig guide and this operator's
manual are also included.
The following recommended accessories are currently available at Sears Retail Stores.
I 5-1/2 in.
Thin Kerf Blade
WARNING:
The use of attachments or accessories not listed might be hazardous.
SAVE THESE INSTRUCTIONS
PRODUCT SPECIFICATIONS
5-1/2 in. (140 mm)
3/8 in. (10 mm)
1-9/16 in. (40 mm)
1-1/8 in. (29 mm)
UNPACKING
ACCESSORIES
No Load Speed
Motor
Charge Rate
Charger Rating
WARNING:
If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
6
4,000 RPM
18 Volt DC
1 Hour
120 volts, 60 Hz, AC
Advertisement
Table of Contents
