Safety Symbols; Damage Prevention And Information Messages; Safety Alert - Craftsman 320.28084 Product Manual

The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols, and the explanations with them, deserve your careful attention and
understanding. The symbol warnings DO NOT, by themselves, eliminate any danger.
The instructions and warnings they give are no substitutes for proper accident-pre-
vention measures.
,_ WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety-alert symbols, such as "DANGER," "WARNING," and
"CAUTION," before using this router. Failure to follow all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANINGS
_. SAFETY=ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
_, DANGER: Failure to obey this safety warning WILL result in death or serious
injury to you or to others. Always follow the safety precautions to reduce the risk
of fire, electric shock, and personal injury.
,_ WARNING: Failure to obey this safety warning CAN result in death or serious
injury to you or to others. Always follow the safety precautions to reduce the risk
of fire, electric shock, and personal injury.
_. CAUTION: Failure to obey this safety warning MAY result in personal injury
to you or others or property damage. Always follow the safety precautions to
reduce the risk of fire, electric shock, and personal injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform user of important information and/or instructions that could lead
to equipment or other property damage if not followed. Each message is preceded
by the word "NOTE:" as in the example below:
NOTE: Equipment and/or property damage may result if these instructions are
not followed.
_, WARNING: The operation of any router can result in
W_ARYOUR foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool
operation, ALWAYS wear safety goggles or safety glasses
with side shield and a full-face shield when needed.
We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shield,
available at Sears Stores or other Craftsman' Outlets.
28084 Manual Revised 07-0712 Page 3