1. Boom Mount Bracket
3. Tank with Frame Tubes
4. Spray Gun Assembly
Hitch Arms (2)
7, Hitch Brackets (2)
9. Wheels (2)
OF PARTS FROM CARTON
Remove all parts and hardware packages from the
carton, Lay out a!J parts and hardware and identify
using the illustrations on pages 3 and 4.
(2) 1/2" Wrenches
Assemble the axle through the large holes in the
frame tubes. Jf the axle will not fit, slightly loosen the
bolts in the frame tubes to align the holes. Retighten
the bolts after assembling axle. See figure 1.
a spacer, a 1/2" flat washer, a wheel and
another 1/2" fiat washer onto the axle. Lightly tap a
palnut onto the end of the axle. Repeat on other end
of axle. See figure 1.
Assemble a hitch arm to the inside of a frame tube
underneath the tank. Use two 5/16" x 2" hex bolts and
5/16" nylock nuts as shown in figure 2. Do not tighten
yet. Repeat for other side.