Advertisement
Quick Links
Owner's Manual
iPR
OFESSI
0 HAL
i
112 in. PROFESSIONAL
CORDLESS DRILL-DRIVER
Variable Speed / Reversible
Model Nos.
315.271241 (18 Volts)
315.271251 (24 Volts)
Save this manual
for
future reference
• IL CAUTION:
Read and
follow all Safety Rules and
Operating Instructions before
first use of this product.
Customer
Help Line: 1-800-932-3188
Sears,
Roebuck
and Co.,
Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
972000-821
3-01
• Safety
• Features
• Assembly
• Operation
• Maintenance
• Parts List
®
Advertisement
Related Manuals for Craftsman 315.271241
Summary of Contents for Craftsman 315.271241
- Page 1 Operating Instructions before first use of this product. • Safety • Features Customer Help Line: 1-800-932-3188 • Assembly ® Sears, Roebuck and Co., Hoffman Estates, IL 60179 • Operation Visit the Craftsman web page: www.sears.com/craftsman • Maintenance • Parts List 972000-821 3-01...
- Page 2 TABLE OF CONTENTS • General Safety Rules ..............................• Specific Safety Rules/Symbols ..........................• Features ..................................• Assembly ..................................• Operation ................................10-14 • Maintenance ................................• Accessories ................................. • Exploded View And Repair Parts List ......................... • Parts Ordering / Service .............................. WARNING: Read and understand all instructions.
- Page 3 Tool Use and Care Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp • Use clamps or other practical way to secure and cutting edges are less likely to bind and are easier to support the workpiece to a stable platform.
- Page 4 c. That wire size is large enough for AC ampere Important Safety Charger Instructions rating of charger as specified below: • Save these instructions. This manual contains Cord Length (Feet) 100' Important safety and opereUng Instructions Cord Size (AWG) battery charger part number _-11040 (g81399-001).
- Page 5 WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and •...
-
Page 6: Specifications
PRODUCT SPECIFICATIONS: 315.271251 DRILL-DRIVER 315.271241 Chuck 1/2 in. Keyless 1/2 in. Keyless DC Motor 18 Volts DC Motor 24 Volts Motor Gear Train Two Speed Two Speed Switch Variable Speed Variable Speed No Load Speed 0-400 RPM (Low) 0-400 RPM (Low) 0-1400 RPM (High) 0-1400 RPM (High) 24 Positions... - Page 7 TWO SPEED LEVEL GEARTRAIN(HI-LO) SCREWDRIVERBITS AUXILIARY KEYLESS CHUCK YELLOWLIGHT"ON" AND STORAGE RED LIGHT FLASHING AREA INDICATESDEFECTIVE BATTERYPACK DIRECTIONOF ROTATION SELECTOR RED LIGHT"ON" CHARGER INDICATESFAST CHARGINGMODE GREEN LIGHT"ON" INDICATESFULLY CHARGEDANDSLOW CHARGING WRIST STRAP TO MAINTAINBATTERYPACK Fig. 1 CHARGER See Figure 2. Your charger has a "key hole"...
- Page 8 AUXILIARYHANDLE INSTALLING BITS See Figure 4. See Figure 3. • Lock the switch trigger'by placing the direction of An auxiliary handle is packed with your drill-driver for ease of rotation selector in center position. See Figure 11. operation and to help prevent loss of control. The handle can be rotated 360 °.
- Page 9 TO A'n'ACH BATTERY PACK TO DRILL TO REMOVE BATTERY PACK FROM DRILL See Figure 6. See Figure 7. Note: Battery pack is shipped in a low charge condition. • Lock the switch trigger by placing the direction of Therefore, it must be charged prior to use. Refer to page 10, rotation selector in center position.
- Page 10 If battery pack is deeply discharged, red light should WARNING: If any parts are missing, do not operate your drill-driveruntil the missing parts are replaced. become steady after voltage has increased, normally within 60 minutes. Failure to do so could result in possible serious personal injury.
- Page 11 SWITCH LOCK SWITCH See Figure 11. See Figure 9. The switch trigger can be locked in the OFF position. This To turn your drill ON, depress the switch trigger. To turn it feature can be used to prevent the possibility of accidental OFF, release the switch trigger.
- Page 12 KEYLESS CHUCK ADJUSTING RING TO DECREASE See Figure 12. TORQUE A keyless chuck has been provided with your drill to allow for easy installation and removal of bits. As the name implies, you can hand tighten or release drill bits in the chuck jaws.
- Page 13 DRILLING APPLICATIONS See Figure 16. (Use drill-driver only for the purpose listed below) • Drilling in wood. END VIEW • Drilling in ceramics, plastics, fiberglass, and lami- nates. • Drilling in both hard and soft metals. • Using driving accessories, such as driving screws with screwdriver bits.
- Page 14 Insert hex key wrench in chuck and tighten chuck CHUCK REMOVAL jaws securely. Tap sharply with a mallet in a counter- See Figures 17, 18, and 19. clockwise direction. This will loosen chuck on the The chuck must be removed in order to use some spindle.
- Page 15 Do not abuse power tools. Abusive practices can WARNING: When servicing use only identical Craftsman replacement parts. Use of any other damage tool as well as workpiece. parts may create a hazard or cause product damage. Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer.
- Page 16 Thefollowing recommended accessories a re currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • High Speed Bits ..1/2 in. Max. • 30-Pc. Power Screwdriver/Nutdriver Set and Case • Wood Boring Bits..1-1"/2 in. Max. •...
- Page 17 NOS. 315.271241 / 315.2712151 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CRAFTSMAN 1/2 In. PROFESSIONAL CORDLESS DRILL-DRIVER or when ordering repair parts. SEE BACK...
- Page 18 For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME sM Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.sears.com...