Craftsman 113.298032 Owner's Manual page 13

For very close adjustments, grasp the guide bar with both
hands and move the fence with your thumbs,
Place fence on saw but DO NOT LOCK IT.
Move the REAR END of the fence slightly to the right or
left ... when you release it, the fence should "spring"
back to its original position.
If it does not, the spring pressure must be INCREASED.
1. Loosen the screws.
2. Move Spring slightly toward front of fence.
If the fence does not slide easily along the bars, the pressure
of the spring can be REDUCED.
1. Loosen the screws.
2. Move spring slightly toward rear of fence ... tighten
3crew3.
SPRING
5CR_WS
13