DCS DishDrawer DD224P5 Use And Care Manual page 28

Fau t codes
F1
HEAVY #_'OR_'_A_- FAST DEMCATE Rfl_'SE
Flood switch has been
activated_
Turn the water and power supply to the
DishDrawer ®off and call your Authorized
Service Center.
F2 Motor problem. Call your Authorized Service Center.
F3 Temperature sensor Ensure water coming in through the inlet
failed_ hose is less than 149°R You may need to
install a tempering valve on your water
HEAVY NORMAL FAST DELICATE RINSE
F4 Faulty temperature Call your Authorized Service Center.
sensor or ebment
H_VY NORMAL FAST DELICATE Rt_dSE
F5
Lid fault 1 Turn power supply to DishDrawer off,
then turn on power supply. Fault may
reset.
HEA_'Y _OnMAL FAST _ E_J_ R_SE 2 Call your Authorized Service Center_
F6 Lid fault 1 Turn power supply to DishDrawer off,
then turn on power supply, Fault may
reset.
hEAVY t'_'O,_;'_aL FAST r _EL_CATE _,_SE 2 Call your Authorized Service Center.
F7 Lid fault Call your Authorized Service Center.
F8 Electrical problem 1 Turn power supply to DishDrawer of L
2 Call your Authorized Service Center.
HEAVY NB'_RMA£ FAST DELICATE RIt_(SE
F9 Electronics Call your Authorized Service Center.
malfunction.
HEAVY NORMAL FAST DELICATE RI_LSE