Download Print this page

DCS DishDrawer DD224P5 Use And Care Manual page 26

Hide thumbs Also See for DishDrawer DD224P5:

Advertisement

Available languages

Available languages

Continuous
A fault has occurred.
Refer to the Fault codes section.
beeping
Intermittent
D[shDraweP
[s[n pause
Close the DishDraweP
and press the _[_
beeping
mode.
button.
DbhDrawe¢ _will
not start
Excesswater in the
DishDrawe¢ _
Power supply [s not
Connect the power supply.
connected.
The drawer is not closed
Ensure the drawer is firmly closed.
properly.
Lock feature is on.
Turn Lock off. Hold down the _ button
until
the light above the _ button
disappears.
_[[ button
not pressed.
Press the button.
Drain hose(s) bent or
Straighten
the drain hose(s).
kinked.
Blocked filters.
Clean the filter plate/drain
filter.
Refer to the
Care and cleaning
section.
Water marks on the
Rinse agent depleted.
Refill the rinse agent dispenser.
dishes
..........................................................................................................................................................................
Rinse agent setting
too low.
Increase the rinse agent setting.
DishDraweP
overloaded/
Refer to the section on loading.
incorrectly
loaded.
DishDrawer
®
Some foods, like tomato
Pre-rinse dishes before placing in the
interior
is stained
based products, may
DishDraweP.
Alternatively,
using the Rinse
stain the inside of the
program
after adding the dishes may
DishDraweP.
minimize
staining.
Dishes did not dry
Incorrect
loading.
Ensure the dishes are not nesting together.
No detergent
dispensed
Excessive motor
noise
Rinse agent depleted,
Refill the rinse agent dispenser,
Rinse agent setting
too low,
Increase the rinse agent setting,
Eco wash program
used.
Choose a standard wash program.
Detergent
dispenser was
Clean the dispenser and ensure the
wet when loaded,
dispenser
is dry when adding detergent.
The filter plate and/or spray
Refer to the care and cleaning
section for
arm [s incorrectly
placed,
details on correct placement.
No water in the motor area,
This usually occurs on the first use or when
the DishDraweP
has not been used for
long periods of time.
Run the DishDraweP
through
a wash program.

Advertisement

loading

This manual is also suitable for:

Dishdrawer dd124p5