Note: You can check the current setting with the test printout (see
page 21) . When terminating head check setting, confirm that
STATUS LED lights green and then turn the printer power off .
Online Command Setting Mode
Online Command Designation
Type
Petit lapin compatible
command designation
SBPL command
designation
Online command designation change
Change of online command designation is available with the designation
of DSW and key at the printer power on . The setting is valid after turning
the printer off .
➊
Auto dispense mode designation
DSW-1, 2, 3, 4 = (OFF, OFF, OFF, ON) + Cover open + PRINT Key +
POWER
➋
Manual dispense mode designation
DSW-1, 2, 3, 4 = (OFF, OFF, OFF, ON) + Cover open + FEED key +
POWER
Setting in process
(STATUS LED blinks green .)
Setting complete
(STATUS LED lights green .)
36
Operation
Uses online command
as Petit lapin standard
command .
Uses online command as
SBPL command .
Default
SBPL
command
designation