Oki LP441b Manual Rapide page 34

Dispense Mode
Specifying dispense mode
Type
Auto print
Manual print
Dispense mode designation change
Change of dispense mode setting is available with the designation of
DSW and key at the printer power on . The setting is valid after turning
the printer off .
Auto dispense mode designation
➊
DSW-1, 2, 3, 4 = (OFF, OFF, OFF, ON) + Cover open + PRINT Key +
POWER
Manual dispense mode designation
➋
DSW-1, 2, 3, 4 = (OFF, OFF, OFF, ON) + Cover open + FEED key +
POWER
Dispense mode setting in process
(STATUS LED is blinking green .)
Setting complete
(STATUS LED lights green .)
34
Operation
Prints one label after receiving data
and waits for peeling . After peeling a
label, automatically prints next label .
Prints one label after receiving data
and enters offline state . Pressing the
PRINT key allows next label to be
printed . After printing the specified
number of labels, printing terminates .
No printing occurs even when the
PRINT key is pressed .
Default
Manual print