Oki LP441b Manual Rapide page 21

Lp440, lp441 quick guide (english, fran栩s, espa?ol, portugu鱩
Hide thumbs Also See for LP441b:
Table of Contents

Advertisement

Available languages

Available languages

5
Close the cover
5
Close the cover after
after confirming
confirming that the
5
Close the cover after
4
that the leading
leading edge of the
4
confirming that the
edge of the label is
label is outside the
leading edge of the
outside the printer
printer (more than 10
label is outside the
(more than 10 mm) .
mm).
printer (more than 10
When using a non-
When using a non-separate
mm).
separate label, press
label, press FEED key to
When using a non-separate
FEED key to feed a
feed a piece of label and pull
label, press FEED key to
piece of label and pull
the label upward to cut it
feed a piece of label and pull
the label upward to cut
along the perforation.
the label upward to cut it
it along the perforation .
If the label is jammed, retry
along the perforation.
If the label is jammed,
label setting procedure.
If the label is jammed, retry
retry label setting
6
label setting procedure.
procedure .
6
Slide the dispenser unit
until it stops.
6
Slide the dispenser unit
Slide the dispenser unit
until it stops .
until it stops.
This completes the label setting in the Dispense mode.
This completes the label setting in the Dispense mode.
To changing Dispense mode to continuous
This completes the label setting in the Dispense mode .
This completes the label setting in the Dispense mode.
To changing Dispense mode to continuous
mode
• T o changing Dispense mode to
mode
To changing Dispense mode to continuous
continuous mode
Lifting the change lever,
mode
Lifting the change lever, slide the
Lifting the change lever,
slide the dispenser unit
dispenser unit until stops .
slide the dispenser unit
until stops.
Lifting the change lever,
until stops.
slide the dispenser unit
until stops.
28
28
Close the cover after
confirming that the
leading edge of the
label is outside the
printer (more than 10
mm).
When using a non-separate
label, press FEED key to
feed a piece of label and pull
the label upward to cut it
along the perforation.
If the label is jammed, retry
label setting procedure.
Slide the dispenser unit
until it stops.
Label leading edge
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lp441sLp441wLp440Lp441

Table of Contents