Components; Specifications - SATO M-84Pro Series Quick Manual

M-84PRO Quick Guide

Components

Pg 3
Label Roll Guide
M-84PRO Quick Guide
M-84PRO Specifications
General Printer Specifications
SPECIFICATION M-84PRO-2
PRINT
Method
Speed 2 to 10 ips
(User Selectable) 50 to 250 mm/s
Print Module (Dot .0049 in.
Size) .125 mm
Resolution 203 dpi
8 d/mm
Maximum Print
Width
Maximum Print 49.2 in.
Length 1249 mm
MEDIA
Minimum Width
Minimum Length
Continuous
Tear-Off
Cutter
Dispense
Maximum Width
Type
Maximum Caliper
Roll OD (max)
Face-In
Core ID (min)
SENSING
See-Thru
Reflective Eye-mark
Continuous Form
RIBBON
Maximum Width
Length (max)
Thickness
M-84PRO-3 M-84PRO-6
Direct or Thermal Transfer
2 to 8 ips 2 to 6 ips
50 to 200 mm/s 50 to 150 mm/s
.0033 in. .0017 in.
.083 mm .042 mm
305 dpi 609 dpi
12 d/mm 24 d/mm
4.1 in.
104 mm
32.8 in. 14.0 in.
835 mm 356 mm
.87 in. (22 mm)
0.24 in. (6 mm)
0.63 in. (16 mm)
1.18 in. (30 mm)
1.18 in. (30 mm)
5.0 in.
125 mm
Roll or Fan-Fold Die Cut Labels
Thermally Sensitive
0.008 in.
0.21 mm
8.6 in.
220 mm
3 in.
76.2 mm
Movable
Movable
Sensor Not Used
4.4 in. (111 mm)
1475 ft. (450 mm)
4.5 micron, Wound Face-In
Pg 20