1.
If shipped in a wooden crate:
a.
Using an 11 mm (7/16 inch) ratchet or wrench, remove the six lag screws at the base of
the crate.
b.
Using the claw end of a claw hammer, remove the crate clamps, and then remove the crate
panels.
WARNING!
Crate clamps are under tension. Wear safety glasses and hold onto the clamp with
your free hand during removal.
Steps 2 through 5 refer to
1. Polyester bands
3. Carton fasteners
Figure 18 Removing the outer carton
.
64
Delivery and unpacking
Figure
18.
2. Pallet nails