Dimensions; Dku; Xp24000 Dimensions; Xp20000 Dimensions - HP XP20000/XP24000 Manual

TIP:
XP components are installed without sliding rails in the XP20000 rack assembly, so the rack does not
require stabilizers. If you install other equipment in the rack, you must consider adding stabilizers.
For information about stabilizers, ballasts, tie-down option kits and other options for the HP 10000
model 10642 G2 rack, see the rack options website:
http://www.hp.com/products/rackoptions

Dimensions

Use the packaged values when determining delivery space requirements and unpackaged values for
space planning.
Table 1 XP24000 dimensions
XP24000 DKC dimensions
Dimensions
Width
Depth
Height
XP24000 DKU dimensions
Width
Depth
Height
NOTE:
DKU unpackaged width includes two side panels each 1.6 cm (0.63 in.) wide.
Table 2 XP20000 dimensions

XP20000 dimensions

Width with side panels
Depth front to rear door
Height
14 Site requirements for the HP Disk Arrays
DKC unpackaged
cm
78.2
92.5
192
DKU unpackaged
cm
65
92.5
192
DKC packaged
in cm
30.8 95
36.5 111
75.6 209
DKU packaged
in cm
25.6 95
36.42 111
75.6 209
cm
60.43
101.5
200.35
in
37.4
43.7
82.3
in
37.4
43.7
82.3
in
23.8
40
78.9