Removing Packaging Materials - HP StorageWorks XP12000 Site Preparation Manual

1 DKUs shipped as upgrades (without a DKC) will contain a ramp.
66

Removing packaging materials

Unpack the DKC first. DKC packaging contains a wooden ramp; standard
DKU packaging does not
and DKUs.
1. If shipped in a wooden crate:
a. Using an 11mm (7/16") ratchet or wrench, remove the six lag screws
at the base of crate.
b. Using the claw end of a claw hammer, remove the crate clamps.
Warning
Crate clamps are under tension. Wear safety glasses and hold onto the
clamp with your free hand during removal.
c. Remove the crate panels.
HP StorageWorks XP12000 Disk Array Site Preparation Guide
1
. You will use the ramp to unload both the DKC