Startup Procedures Using Detached Process On Dcl - HP XP P9500 Configuration Manual

After making the S-VOL for Writing enable by using "pairsplit" or "horctakeover" command, you
need to perform the "mcr sysman" command in order to use the S-VOLs for backup or disaster
recovery.
$ pairsplit -g CAVG -rw
$ mcr sysman
SYSMAN> io auto
SYSMAN> exit
$ sh dev dg
Device
Name
$1$DGA145:
$1$DGA146:
$1$DGA147:
$1$DGA149:
$1$DGA151:
$1$DGA152:
$1$DGA153:

Startup procedures using detached process on DCL

(1) Create the shareable Logical name for RAID if undefined initially.
RAID Manager needs to define the physical device ($1$DGA145...) as either DG* or DK* or GK*
by using SHOW DEVICE command and DEFINE/SYSTEM command, but then does not need to be
mounted in RAID Manager version 01- 1 2-03/03 or earlier.
$ show device
Device
Name
$1$DGA145:
$1$DGA146:
:
:
$1$DGA153:
$$ DEFINE/SYSTEM DKA145 $1$DGA145:$ DEFINE/SYSTEM DKA146 $1$DGA146:::$ DEFINE/SYSTEM DKA153 $1$DGA153:
(2) Define the RAID Manager environment in LOGIN.COM.
You need to define the Path for the RAID Manager commands to DCL$PATH as the foreign command.
See the section about Automatic Foreign Commands in the OpenVMS user documentation.
$ DEFINE DCL$PATH SYS$POSIX_ROOT:[horcm.usr.bin],SYS$POSIX_ROOT:[horcm.etc]
If RAID Manager and HORCM are executing in different jobs (different terminal), then you must
redefine LNM$TEMPORARY_MAILBOX in the LNM$PROCESS_DIRECTORY table as follows:
$ DEFINE/TABLE=LNM$PROCESS_DIRECTORY LNM$TEMPORARY_MAILBOX LNM$GROUP
(3) Discover and describe the command device on SYS$POSIX_ROOT:[etc]horcm0.conf.
$ inqraid DKA145-151 -CLI
DEVICE_FILE
CL1-H 30009 145 -
DKA146
DKA147
DKA148
DKA149
DKA150
DKA151
HORCM_MON
#ip_address
127.0.0.1
HORCM_CMD
#dev_name
You will have to start HORCM without a description for HORCM_DEV and HORCM_INST because
the target ID & LUN are Unknown.
You can determine a mapping of a physical device with a logical name easily by using the raidscan
-find command option.
(4) Execute 'horcmstart 0'.
$ run /DETACHED SYS$SYSTEM:LOGINOUT.EXE /PROCESS_NAME=horcm0 -
_$ /INPUT=VMS4$DKB100:[SYS0.SYSMGR.][horcm]loginhorcm0.com -
_$ /OUTPUT=VMS4$DKB100:[SYS0.SYSMGR.][horcm]run0.out -
_$ /ERROR=VMS4$DKB100:[SYS0.SYSMGR.][horcm]run0.err
%RUN-S-PROC_ID, identification of created process is 00004160
24 Installation requirements
Device Error
Status Count
(VMS4) Online
(VMS4) Online
(VMS4) Online
(VMS4) Online
(VMS4) Online
(VMS4) Online
(VMS4) Online
Device Error
Status Count
(VMS4) Online 0
(VMS4) Online 0
(VMS4) Online 0
PORT SERIAL LDEV CTG
- - - OPEN-9-CM
CL1-H 30009 146 -
CL1-H 30009 147 -
CL1-H 30009 148 -
CL1-H 30009 149 -
CL1-H 30009 150 -
CL1-H 30009 151 -
service poll(10ms)
30001 1000
dev_name dev_nameDKA145
Volume Free Trans Mnt
Label Blocks Count Cnt
0
0
(VMS4) Online
0$1$DGA148:
(VMS4) Online
0$1$DGA150:
0
0
0
Volume Free
Label Blocks Count Cnt
H/M/12 SSID R:Group PRODUCT_IDDKA145
s/S/ss 0004 5:01-11 OPEN-9
s/P/ss 0004 5:01-11 OPEN-9
s/S/ss 0004 5:01-11 OPEN-9
s/P/ss 0004 5:01-11 OPEN-9
s/S/ss 0004 5:01-11 OPEN-9
s/P/ss 0004 5:01-11 OPEN-9SYS$POSIX_ROOT:[etc]horcm0.conf
timeout(10ms)
3000
0
0
Trans Mnt