HP XP P9500 Configuration Manual page 78

For Windows: set HORCC_MRCF=1
Designate a group name (Oradb2) and a local host P-VOL a case.
# paircreate
This command creates pairs for all LUs assigned to group Oradb2 in the configuration definition
file (two pairs for the configuration in above figure).
Designate a volume name (oradev2- 1 ) and a local host P-VOL a case.
# paircreate
This command creates pairs for all LUs designated as oradev2- 1 in the configuration definition file
(CL1-A,T1,L1 and CL1-D,T2,L1 for the configuration in the above figure).
Designate a group name and display pair status.
# pairdisplay
Group PairVol(L/R) (Port#,TID,LU-M),
oradb2 oradev2-1(L) (CL1-A, 1, 1 - 2)
oradb2 oradev2-1(R) (CL2-D, 2, 1 - 0)
oradb2 oradev2-2(L) (CL1-A, 1, 2 - 2)
oradb2 oradev2-2(R) (CL2-D, 2, 2 - 0)
Example of RAID Manager commands with HOSTD (group Oradb2):
When the command execution environment is not set, set HORCC_MRCF to the environment
variable.
For C shell: # setenv HORCC_MRCF 1
For Windows: set HORCC_MRCF=1
Designate a group name and a remote host P-VOL a case.
# paircreate
This command creates pairs for all LUs assigned to group Oradb2 in the configuration definition
file (two pairs for the configuration in the above figure).
Designate a volume name (oradev2- 1 ) and a remote host P-VOL a case.
# paircreate
This command creates pairs for all LUs designated as oradev2- 1 in the configuration definition file
(CL1-A,T1,L1 and CL1-D,T2,L1 for the configuration in the above figure).
Designate a group name and display pair status.
# pairdisplay
Group PairVol(L/R) (Port#,TID,LU-M),
oradb2 oradev2-1(L) (CL2-D, 2, 1 - 0)
oradb2 oradev2-1(R) (CL1-A, 1, 1 - 2)
oradb2 oradev2-2(L) (CL2-D, 2, 2 - 0)
oradb2 oradev2-2(R) (CL1-A, 1, 2 - 2)
The command device is defined using the system raw device name (character-type device file
name). The command device defined in the configuration definition file must be established in a
way to be following either every instance. If one command device is used between different
instances on the same SCSI port, then the number of instances is up to 16 per command device.
If this restriction is exceeded, then use a different SCSI path for each instance. For example, the
command devices for the following figure would be:
HP-UX:
HORCM_CMD of HORCMINST0 = /dev/rdsk/c0t0d1 HORCM_CMD of HORCMINST1 =
/dev/rdsk/c1t0d1
Solaris:
HORCM_CMD of HORCMINST0 = /dev/rdsk/c0t0d1s2 HORCM_CMD of HORCMINST1 =
/dev/rdsk/c1t0d1s2
78 Sample configuration definition files
-g Oradb2 -vl
-g Oradb2 -d oradev2-1 -vl
-g Oradb2
Seq#,
30053
30053
30053
30053
-g Oradb2 -vr
-g Oradb2 -d
-g Oradb2
LDEV#..P/S, Status, Seq#, P-LDEV#
18..P-VOL COPY
24..S-VOL COPY
19..P-VOL COPY
25..S-VOL COPY
oradev2-1 -vr
Seq#, LDEV#..P/S, Status, Seq#,P-LDEV# M
30053 24..S-VOL COPY
30053 18..P-VOL COPY
30053 25..S-VOL COPY
30053 19..P-VOL COPY
M
30053 24 -
----- 18 -
30053 25 -
----- 19 -
----- 18 -
30053 24 -
----- 19 -
30053 25 -