HP XP P9500 Configuration Manual page 61

The following ports can only be specified for XP12000 Disk Array/XP10000 Disk Array and
XP24000/XP20000 Disk Array:
- Basic
CL5 an bn cn
CL6 an bn cn
CL7 an bn cn
CL8 an bn cn
CL9 an bn cn
CLA an bn cn
CLB an bn cn
CLC an bn cn
CLD an bn cn
CLE an bn cn
CLF an bn cn
CLG an bn cn
Target ID: Defines the SCSI/Fibre target ID number of the physical volume on the specified
port. See "Fibre-to-SCSI address conversion " (page 51)
conversion.
LU#: Defines the SCSI/Fibre logical unit number (LU#) of the physical volume on the specified
target ID and port.
For Fibre Channel, if the TID and LU# displayed on the system are different from the TID on the
Fibre address conversion table, then use the TID and LU# indicated by the raidscan command in
the RAID Manager configuration file.
MU# for HOMRCF: Defines the mirror unit number (0 - 2) for the identical LU on the HOMRCF.
If this number is omitted it is assumed to be zero (0). The cascaded mirroring of the S-VOL is
expressed as virtual volumes using the mirror descriptors (MU#1-2) in the configuration
definition file. The MU#0 of a mirror descriptor is used for connection of the S-VOL. Snapshot
will have 64 mirror descriptions in HOMRCF and Snapshot feature.
Feature SMPL
MU#0-2
HOMRCF valid
Snapshot valid
Option
dn en fn gn
dn en fn gn
dn en fn gn
dn en fn gn
dn en fn gn
dn en fn gn
dn en fn gn
dn en fn gn
dn en fn gn
dn en fn gn
dn en fn gn
dn en fn gn
P-VOL
MU#3 – 63 MU#0-2
Invalid valid
valid valid
Option
hn jn kn ln
hn jn kn ln
hn jn kn ln
hn jn kn ln
hn jn kn ln
hn jn kn ln
hn jn kn ln
hn jn kn ln
hn jn kn ln
hn jn kn ln
hn jn kn ln
hn jn kn ln
for further information on Fibre address
S-VOL
MU#3 – 63 MU#0
Invalid valid
valid valid
Sample configuration definition files
Option
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
mn nn pn qn rn
MU#1 – 63
Invalid
Invalid
61