HP XP P9500 Configuration Manual page 42

Table 12 Configuration (HORCM_CONF) parameters (continued)
Parameter
MU#
Serial#
CU:LDEV(LDEV#)
dev_name for
HORCM_CMD
1: Use decimal notation for numeric values (not hexadecimal).
Do not edit the configuration definition file while RAID Manager is running. Shut down RAID
Manager, edit the configuration file as needed, and then restart RAID Manager.
Do not mix pairs created with the "At-Time Split" option (-m grp) and pairs created without this
option in the same group defined in the RAID Manager configuration file. If you do, a pairsplit
operation might end abnormally, or S-VOLs of the P-VOLs in the same consistency group (CTG)
might not be created correctly at the time the pairsplit request is received.
42 Installing and configuring RAID Manager
Default Type
0 Numeric value
*1
See
None Numeric value
None Numeric value
None Character string
Limit
7 characters
12 characters
6 characters
63 characters
Recommended value = 8 char.
or less