HP XP P9500 Configuration Manual page 67

Example of RAID Manager commands with HOSTA:
Designate a group name (Oradb) and a local host P-VOL a case.
# paircreate
This command creates pairs for all LUs assigned to group Oradb in the configuration definition
file (two pairs for the configuration in the above figure).
Designate a volume name (oradev1) and a local host P-VOL a case.
# paircreate
This command creates pairs for all LUs designated as oradev1 in the configuration definition file
(CL1-A,T1,L1 and CL1-D,T2,L1 for the configuration in the figure above).
Designate a group name and display pair status.
# pairdisplay
Group PairVol(L/R)
oradb oradev1(L)
oradb oradev1(R)
oradb oradev2(L)
oradb oradev2(R)
Example of RAID Manager commands with HOSTB:
Designate a group name and a remote host P-VOL a case.
# paircreate
This command creates pairs for all LU designated as Oradb in the configuration definition file (two
pairs for the configuration in the above figure).
Designate a volume name (oradev1) and a remote host P-VOL a case.
# paircreate
This command creates pairs for all LUs designated as oradev1 in the configuration definition file
(CL1-A,T1,L1 and CL1-D,T2,L1 for the configuration in the above figure).
Designate a group name and display pair status.
# pairdisplay -g Oradb
Group PairVol(L/R)
oradb oradev1(L)
oradb oradev1(R)
oradb oradev2(L)
oradb oradev2(R)
The command device is defined using the system raw device name (character-type device file
name). For example, the command devices for the following figure would be:
HP-UX:
HORCM_CMD of HOSTA = /dev/rdsk/c0t0d1 HORCM_CMD of HOSTB = /dev/rdsk/c1t0d1
Solaris:
HORCM_CMD of HOSTA = /dev/rdsk/c0t0d1s2 HORCM_CMD of HOSTB = /dev/rdsk/c1t0d1s2
For Solaris operations with RAID Manager version 01-09-03/04 and higher, the command device
does not need to be labeled during format command.
AIX:
HORCM_CMD of HOSTA = /dev/rhdiskXX HORCM_CMD of HOSTB = /dev/rhdiskXX
where XX = device number assigned by AIX
Tru64 UNIX:
HORCM_CMD of HOSTA = /dev/rrzbXXc HORCM_CMD of HOSTB = /dev/rrzbXXc
-g Oradb -f never
-g Oradb -d oradev1
-g Oradb
P,T#,L#), Seq#, LDEV#..P/S,
(CL1-A, 1,1) 30053 18...P-VOL
(CL1-D, 2,1) 30054 19...S-VOL
(CL1-A, 1,2) 30053 20...P-VOL
(CL1-D, 2,2) 30054 21...S-VOL
-g Oradb -f never
-g Oradb -d oradev1
(P,T#,L#), Seq#, LDEV#..P/S,
(CL1-D, 2,1) 30054 19...S-VOL
(CL1-A, 1,1) 30053 18...P-VOL
(CL1-D, 2,2) 30054 21...S-VOL
(CL1-A, 1,2) 30053 20...P-VOL
-vl
-f never -vl
Status, Fence, Seq#, P-LDEV# M
COPY NEVER, 30054
COPY NEVER, -----
COPY NEVER, 30054
COPY NEVER , ----- 20
-vr
-f never -vr
Status, Fence, Seq#, P-LDEV# M
COPY NEVER, -----
COPY NEVER, 30054
COPY NEVER, -----
COPY NEVER, 30054
Examples of RAID Manager configurations
19 -
18 -
21 -
-
18 -
19 -
20 -
21 -
67