Task 11: Diagram The Planned Configuration - HP Surestore 64 - Director Switch Planning Manual

Task 11: Diagram the Planned Configuration

Determine peripheral devices that will connect to each director, and if and where
connectivity should be limited (zoning). These devices may include servers, storage control
devices, and other directors in a multiswitch fabric.
Part of this task may have been performed when the configuration was determined. It
might be helpful to draw the configuration diagram. Indicate distances in the diagram if
necessary. Transfer information from the configuration diagram to the director planning
worksheet provided as part of Task 13: Complete the Planning Worksheet on page 102.
Task 11: Diagram the Planned Configuration 99