Connectivity Unit Link Table - HP Surestore 6164 - Switch Reference Manual

Connectivity Unit Link Table

connUnitLinkTable
Syntax
Access
Fibre Alliance MIB Object Types
information must include either a nonzero connUnitNodeId, or a nonzero
connUnitPortWwn, for each end of the link.
If the agent is able to discover links that do not directly attach to members
of its agency, and the agent's discovery algorithm gives some assurance
that the links are recently valid, it can include these links.
Link information entered by administrative action can be included even if
not validated directly, if the link has at least one endpoint in this agency, but
otherwise this information should not be included.
A connectivity unit should fill the table in as best it can. One of the methods
to fill this in is to use the RNID ELS (ANSI document 99-422v0). This
allows you to query a port for the information needed for the link table.
This table is accessed either directly if the management software has an
index value, or using "GetNext". The value of the indices are not required
to be contiguous. Each entry created in this table is assigned an index. This
relationship is kept persistent until the entry is removed from the table or
the system is reset. The total number of entries is defined by the size of the
table.
For an entry to be considered valid, both the X (local) and the Y (remote)
need to have one valid value.
Same as the string shown in the Telnet command errShow.
Note
Sequence of connUnitLinkEntry
Not accessible
155