swAdmStatus
Syntax
Access
Status
Description
268
Value
Declaration
Integer
1 (online)
2 (offline)
3 (testing)
4 (faulty)
5 (reboot)
6 (fastboot)
Read-write
Mandatory
The desired administrative status of the switch. A management station can
place the switch in a desired state by setting this object accordingly.
When the switch is in the faulty state, only two states can be set:
Note
faulty and reboot/fastboot.
Description
Set the switch to be accessible by an external
fibre channel port.
Set the switch to be inaccessible.
Set the switch to run the built-in test.
Set the switch to a "soft" faulty condition.
Set the switch to reboot in 1 second.
Set the switch to fastboot in 1 second.
Fastboot causes the switch to boot but skip
over the POST.
MIB Reference Manual