Flash Administration - HP Surestore 6164 - Switch Reference Manual

Flash Administration

swFlashDLOperStatus
Syntax
Access
270
The next five objects are related to firmware or configuration file
management. The underlying method in the transfer of the firmware or
configuration file is based on either FTP or remote shell. If a password is
provided, FTP is used. If no password is provided, remote shell is used.
Use one of the two following methods to manage the firmware or switch
configuration file in the switch Flash:
1. Set swFlashDLHost.0, swFlashDLUser.0, and swFlashDLFile.0 to an
appropriate host IP address in user dot notation (for example,
192.168.1.7), a user name (for example, administrator), and file name of
the firmware or configuration file (for example, /home/fcswh/v2.2)
respectively.
Or,
1. Set swFlashDLPassword.0 to an appropriate value (for example, secret)
if FTP is the desired method of transfer.
2. Set swFlashDLAdmStatus.0 to 2 (swFwUpgrade), 3 (swCfUpload), or 4
(swCfDownload) accordingly.
Value Declaration
Integer 1 (swCurrent)
2 (swFwUpgraded)
3 (swCfUploaded)
4 (swCfDownloaded)
Read-only
Description
The Flash contains the current
firmware image or configuration file.
The Flash contains the image
upgraded from the swFlashDLHost.0.
The switch configuration file has been
uploaded to the host.
The switch configuration file has been
downloaded from the host.
MIB Reference Manual