HP Surestore 6164 - Switch Reference Manual page 338

swEndDevicePort [swEndDeviceRlsTable]
Syntax
Access
Status
Description
swEndDeviceAlpa [swEndDeviceRlsTable]
Syntax
Access
Status
Description
swEndDevicePortID [swEndDeviceRlsTable]
Syntax
Access
Status
Description
338
Because switches start with port 0, the SNMP port number should be
Note
physical port number + 1. In turn, that means that SNMP port 3 translates to
port 2.
Integer
Not accessible
Mandatory
This object represents the port of the local switch to which the end device is
connected.
Integer
Not accessible
Mandatory
This object represents the AL_PA of the end device. The SNMP AL_PA
number should be the logical AL_PA number + 1. For example, SNMP
AL_PA number 0xf0 translates to 0xef.
Octet String of size 4
Read-only
Mandatory
The fibre channel port address ID of the entry.
MIB Reference Manual