HP Surestore 6164 - Switch Reference Manual page 122

Access
Status
Description
connUnitContact [connUnitTable]
Syntax
Access
122
Value Declaration
Integer 6 (onlineConnUnit)
Read-write
Mandatory
Controls the addressed connUnit. Each implementation can chose not to
allow any or all of these values on a set.
Cold Start and Warm Start are as defined in MIB-II and are not meant to be
a factory reset.
This is similar to swAdmStatus.
• resetConnunitColdStart = reboot
• resetConnunitWarmStart = fastboot
• offlineConnUnit = disable switch
• onlineConnUnit = enable switch
• default after reboot = unknown
The declaration 1 (unknown) maps to the default value upon rebooting, and
2 (invalid) is not applicable.
Display String of size 0 to 79
Read-write
Description
Enable switch; the addressed
unit puts itself into an
implementation-dependant
online state. In general, if a unit
is in an online state, it is capable
of performing meaningful fibre
channel work.
MIB Reference Manual