Removing The Outer Carton - HP StorageWorks XP10000 - Disk Array Manual

below for key packaging points. Steps 2 through 5 refer to
Figure 9.
1. If shipped in a wooden crate:
a.
Using an 11mm (7/16") ratchet or wrench, remove the six lag screws at the base of the
crate.
b.
Using the claw end of a claw hammer, remove the crate clamps, and then remove the crate
panels.
WARNING!
Crate clamps are under tension. Wear safety glasses and hold onto the clamp with
your free hand during removal.
1. Polyester bands
2. Pallet nails
3. Carton fasteners
Figure 8 Removing the outer carton
2. Cut and remove the polyester bands (see .
48 Delivery and unpacking
Figure 8. Steps 6 through 8 refer to