Primary rack dimensions and cable cutout location
Figure 2
shows dimensions, clearances, and the cable cutout location for the primary rack. The cutout
may be off-center as long as it is within the area shown and corresponds to the opening in the bottom
of the rack to allow cables to pass through. See the following pages for additional notes.
Figure 2 Primary rack dimensions
Primary and secondary rack dimensions and cutout locations
Figure 3
shows floor clearance dimensions when two racks are installed.
XP10000 Disk Array Site Preparation Guide
27
Need help?
Do you have a question about the StorageWorks XP10000 - Disk Array and is the answer not in the manual?
Questions and answers