Here is the list of Statistics Computed Data:
Apparent Consumption (or Active Consumption in next release)
Average Apparent Power (or Average Active Power in next release)
Power Failure Count
Power Failure Cumulated Duration
Battery Fault Count
Internal Failure Count
Overload Count
Warning Alarm Count
Critical Alarm Count
Output Off Count
Communication Lost Count
Note: This information depends on device capabilities
4.3. EVENTS
4.3.1. LIST REPRESENTATION
Select the Events
Events List and the following page appears:
Buttons on the bottom toolbar allow filtering on unacknowledged alarms of the corresponding level.
All new alarms are stored in this log.
You can sort the alarms according to Status, Date, Name, Message and Ack.
DELL ULNM – User Guide
P‐164000120 Rev 0.04
Dell UPS Local Node Manager
Figure 8 ‐ Alarms list
USER GUIDE
Dell.com
46