Select one of the items, and then click on the corresponding button on the right:
Edit system information: to enter contact and location information for DELL ULNM software.
Edit language allows the user to change the user language.
(Czech, English, French, German, Japanese, Korean, Polish, Portuguese, Russian, Simplified
Chinese, Spanish are currently supported)
Edit scan settings changes the default SNMP community name for discovery and
enables/disables periodic scan of new nodes.
Module Settings enables optional modules (e.g. Shutdown Controller)
3.1.8. SHUTDOWN CONTROLLER
3.1.8.1.
INTRODUCTION
Dell UPS Local Node Manager can acquire UPS alarms from a UPS (through USB or RS232) and
forward the shutdown alarms to the other Dell UPS Local Node Managers. This specific Dell UPS
Local Node Manager is called the "Shutdown Controller".
Note: The Shutdown Controller can't acquire information through a SNMP/Web Card.
3.1.8.2.
ACTIVATING SHUTDOWN CONTROLLER FEATURE
You have to activate the Shutdown Controller feature on the Dell ULNM 1 that relays the alarms
(connected to the UPS through USB or RS232).
This option can be activated from Settings
Double click on Module settings section, then check the checkbox.
Other Dell UPS Local Node Managers will discover this Dell UPS Local Node Manager through a
network scan.
DELL ULNM – User Guide
P‐164000120 Rev 0.04
Dell UPS Local Node Manager
System
Module Setting
USER GUIDE
Dell.com
36