Dell UPS Local Node Manager
USER GUIDE
Dell.com
2.4.2.2.
COMMAND LINE INSTALLATION
To install from a command line, use the following command (as root):
$ dpkg -i ulnm-linux_X.Y.Z.deb
For example:
$ dpkg -i ulnm-linux_0.01.003-1_i386.deb
(Reading database ... 352242 files and directories currently installed.)
Preparing to replace ulnm-linux 0.01.003 (using .../ulnm-linux_0.01.003-
1_i386.deb)...
Unpacking replacement ulnm-linux ...
Setting up ulnm-linux (0.01.003)...
Once the installation is completed, open a Web browser with the following url http://<@IP>:4679/
<@IP> is the IP address of the machine hosting Dell ULNM.
2.4.3. GENERIC INSTALLATION ON LINUX
If your system doesn't derive from RedHat (.rpm) or Debian (.deb), you can install Dell ULNM using
the generic package.
Note: this method is only supported from the command line.
To install from a command line in interactive mode, use the following command from where the
generic installer is located (as root):
$ ulnm-linux-0x_0x_000x-i386 -install
For silent installation, add the ‐silent parameter as shown below (as root):
$ ulnm-linux-0x_0x_000x-i386 -install -silent
Once the installation is completed, open a Web browser open a Web browser with the following url
http://<@IP>:4679/
<@IP> is the IP address of the machine hosting Dell ULNM
DELL ULNM – User Guide
14
P‐164000120 Rev 0.04