Supervision; Access To The Monitoring Interface; Local Access; Remote Access - Dell PowerEdge UPS 500T User Manual

4. SUPERVISION
4.1. ACCESS TO THE MONITORING INTERFACE
To monitor the Power Source, start the main "Dell UPS Local Node Manager" interface. You can
access the same interface locally or remotely.
4.1.1. LOCAL ACCESS

From the system where Dell UPS Local Node Manager is installed, you can use the following
shortcut:
 
Start Program

From a local machine, you can type the following URL in a Web browser
http://127.0.0.1:4679/
or
https://127.0.0.1:4680/
4.1.2. REMOTE ACCESS

From a remote machine, you can type the following URL in a Web browser
https://<name or IP address of computer hosting DELL ULNM>:4680/
or
http://<name or IP address of computer hosting DELL ULNM >:4679/

In SSL mode, accept the certificate (by clicking on Yes)
Figure 6 ‐ Accepting the SSL Certificate

Enter the Login and Password
DELL ULNM – User Guide
P‐164000120 Rev 0.04

Dell UPS Local Node Manager
Dell UPS Local Node Manager

Open Dell UPS Local Node Manager
To install the certificate on IE7 for Vista, you
need to perform the following steps:
> Run IE as an administrator (Right‐click the
desktop icon)
> Visit the DELL ULNM site.
> Click through the certificate error
> Click the "Certificate Error" button in the
address bar.
> Click View Certificate
> Click Install Certificate
> Click the "Place all certificates in the
following store" radio button, and choose
the "Trusted Root Certification Authorities"
store. If you don't do this, the certificate goes
in your personal store, and it isn't trusted by
IE.
USER GUIDE
Dell.com
39