Dell PowerEdge UPS 500T User Manual page 34

Specific "email action" settings:

SMTP Server: To receive emails on UPS events you have to indicate the SMTP server IP
address

Login, Password: authentication information of the SMTP server

Recipient: Receiver Email address.
Note: you can specify multiple receivers by separating them with coma.

Sender: (Optional field) the email sender
Note that your SMTP server may require a valid email address.

Subject: The email subject (can be customized with pre‐defined variables).

Message: The email message body (can be customized with pre‐defined variables).

Digest: you can specify that you want to receive a consolidation of the alarms that occurred
during a delay that you can choose (if you specify none, each alarm will generate an e‐mail.
With this setting you will receive more emails for the same number of events.
Possible values are: None / Every 10 seconds / Every minutes / Every hour / Every day
Notes:

It is possible to duplicate an existing action already configured and just change some
parameters.

For advanced use, you can Customize the subject and Message e.g. if you have to translate
an e‐mail into an SMS (using an email to SMS external provider).
Clicking on the pen icon starts the Edit message assistant to fill the field with some variables.
Click on the button to add a variable.
DELL ULNM – User Guide
P‐164000120 Rev 0.04
Dell UPS Local Node Manager
USER GUIDE
Dell.com
31