If a Power source has been declared, System Tray Icon can have following states:
The System Tray Icon correctly receives alarms from Dell UPS Local Node Manager ( AC is
present on the Power source)
The System Tray Icon correctly receives alarms from Dell UPS Local Node Manager ( The
Power Source runs in battery mode)
The System Tray Icon correctly receives alarms from Dell UPS Local Node Manager (A
Warning event occurred on Power Source)
The System Tray Icon correctly receives alarms from Dell UPS Local Node Manager ( A
critical event occurred on Power Source)
Communication with Power source has failed
Advanced events and actions customization:
In Dell UPS Local Node Manager installation folder, you can see a configs/scripts folder containing a
sample user‐defined action script (sample_user_script.js).
You have the possibility to modify this script or create new scripts that define very specific events and
actions. The sample script provides details about the expected structure and syntax for defining new
actions and triggers.
To activate the execution of a script you have to set the enabled property to true as follows:
3.1.6. CONFIGURE USER ACCOUNTS
Multiple user accounts can be configured.
From the Settings menu Item, select the User List item, then perform the following steps:
Click on Add user.
Enter the User Login and the User password.
Select the User's Profile level. The following levels are available:
> admin (the user will be able to access all the features)
> user (the user will only access the visualization and is not able to set changes to the system
or nodes).
Click on Create new user button.
DELL ULNM – User Guide
P‐164000120 Rev 0.04
Dell UPS Local Node Manager
USER GUIDE
Dell.com
34